Manual mode:
Is used when the machine is loaded with armature for first time or for testing of: testing of hydraulics,
pulling, and cutting, measuring or turning of the whell.
Automatic mode:
Is used for automatic pulling and straightening of armature, It cuts certain number with certain length.
The straightening-cutting machine mainly consists of three modules:
1. Unwinding device;
2. Straightening-cutting module;
3. Frame.
|
|
Diameter of armature, mm |
ô6 ÷ ¹12 |
|
External diameter of bunch, mm |
< 1550 |
|
Internal diameter of bunch, mm |
>790 |
|
Speed of pulling, m/sec |
up to 1 |
|
Spins of the whell, min-1 |
1680 |
|
Time to cut, min |
0,006 |
|
Pulling capacity, N |
9730 |
|
Length ot cutting*, m |
0,1 ÷ 99 |
|
Descrepancy in the length of cutting, mm |
±1 |
|
Number of cuts for one cycle |
1 ÷ 9999 |
|
Power, kW |
15 |
|
Voltage, V |
380 |
|
Weight, kg. |
|
Straightening-cutting module |
880 |
|
Frames |
150 |
|
Unwinding device |
200 |
|
Total |
1230 |
|
Measurements L x B x H, mm |
|
Straightening-cutting module |
1600 (2000) x 850 x 1700 |
|
Frames |
6 õ 2000 x 1000 x 1100
|
|
Unwinding device |
2300 õ 1600 õ 2000 |
|
