Manual mode:
Is used when the machine is loaded with armature for first time or for testing of: testing of hydraulics,
pulling, and cutting, measuring or turning of the whell.
Automatic mode:
Is used for automatic pulling and straightening of armature, It cuts certain number with certain length.
The straightening-cutting machine mainly consists of three modules:
1. Unwinding device;
2. Straightening-cutting module;
3. Frames.
* - The length of cutting is for frames consisting of 4 sections by 2 meters.
If bigger length is necessary extra sections could be added up. |
|
Diameter of armature, mm |
ô6 ÷ ô10 (ô12) |
|
External diameter of bunch, mm |
< 1550 |
|
Internal diameter of bunch, mm |
> 790 |
|
Speed of pulling, m/min |
46 ÷ 60 |
|
Spins of the whell, min-1 |
1580 |
|
Time to cut, min |
0,0025 |
|
Pulling capacity, N |
9730 |
|
Length ot cutting*, m |
0,1 ÷ 99 |
|
Descrepancy in the length of cutting, mm |
±5 |
|
Number of cuts for one cycle |
1 ÷ 9999 |
|
Power, kW |
11 |
|
Voltage, V |
380 |
|
Weight, kg. |
|
Straightening-cutting module |
940 |
|
Frames |
150 |
|
Unwinding device |
340 |
|
Total |
1430 |
|
Measurements L x B x H, mm |
|
Straightening-cutting module |
1500 x 850 x 1700 |
|
Frames |
2000 x 400 x 1000 – 1 áð.
2000 õ 400 õ 900 – 3 áð.
|
|
Unwinding device |
1600 õ 1600 õ 2000 |
|
