Manual mode:
Is used when the machine is loaded with wire for first time or for testing of: testing of pulling, and cutting, measuring or turning of the whell.
Automatic mode:
Is used for automatic pulling and straightening of wire, it cuts certain number with certain length.
The straightening-cutting machine mainly consists of three modules:
1. Unwinding device;
2. Straightening-cutting module;
3. Frame. |
|
Diameter of armature, mm |
ô1,8 ÷ ô6 |
|
External diameter of bunch, mm |
< 1200 |
|
Internal diameter of bunch, mm |
> 400 |
|
Speed of pulling, m/min |
0 ÷ 100 |
|
Time to cut, sec |
0,025 |
|
Pulling capacity, N |
7800 |
|
Length ot cutting, m |
0,1 ÷ 99 |
|
Descrepancy in the length of cutting, mm |
±0,5 |
|
Number of cuts for one cycle |
1 ÷ 9999 |
|
Power, kW |
7,5 |
|
Voltage, V |
380 |
|
Weight, kg. |
|
Straightening-cutting module |
800 |
|
Frames |
70 |
|
Unwinding device |
170 |
|
Total |
1040 |
|
Measurements L x B x H, mm |
|
Straightening-cutting module |
1500 x 850 x 1700 |
|
Frame |
6000 x 1000 x 1100
|
|
Unwinding device |
1800 õ 1250 õ 1500 |
|
