Свържете се с нас: +359 94 600 185

 

 

straightening cutting machine 12mm

to №12

STRAIGHTENING AND CUTTING MACHINE up to #12

The straightening and cutting machine is designed for unwinding, straightening, and cutting rebar up to #12 from coils with an outer diameter of up to 1550 mm and a weight of up to 2000 kg.

Technical Specifications

Manual Mode:
Used for initial loading of the machine with rebar or for testing: testing the hydraulics, pulling, cutting, measuring, and spindle rotation.Automatic Mode:
Automatically pulls and straightens the rebar, cutting a set number of pieces to a specified length.The straightening and cutting machine mainly consists of three units:
1. Unwinding device;
2. Straightening and cutting module;
3. Racks.
Rebar Diameter, mmØ6 – #12
Outer Diameter of Coil, mm< 1550
Inner Diameter of Coil, mm>790
Pulling Speed, m/secup to 1
Spindle Speed, min-11680
Cutting Time, min0.006
Pulling Force, N9730
Cutting Length*, m0.1 – 99
Length Tolerance, mm±1
Number of Cuts per Cycle1 – 9999
Power, kW15
Voltage, V380
Weight, kg
Straightening and Cutting Module880
Racks150
Unwinding Device200
Total1230

Dimensions L x B x H, mm

Straightening and Cutting Module1600 (2000) x 850 x 1700
Racks6000 x 1000 x 1100
Unwinding Device2300 x 1600 x 2000


Contact us
Contact us