Свържете се с нас: +359 94 600 185

 

 

Bending machines B-22RA

KOMAND B-22RA

BENDING MACHINE – BIGLIAR
Model: COMMAND B-22RA
The bending machine – Bigliar is designed for bending reinforcement and periodic profiles up to Ø22 mm. The machine features both manual and automatic operation modes – the bending angle of the workpiece can be controlled either manually or automatically.

Technical Specifications
Maximum diameter of bent reinforcement, mm

Ø22
Revolutions of bending plate, min-1

17
Time to rotate bending plate by 90°, s

0.88
Maximum bending angle, °

180
Power, kW

1.5
Voltage, V

380
Weight, kg

143
Overall dimensions – L x W x H, mm

750x600x870
Diameter of bent reinforcement Ø, mm 22 14 12 10 8 6.5
Maximum number of simultaneously bent workpieces, pcs. 1 2 3 4 7 9
Manual operation mode:
The bending angle of each individual workpiece is controlled manually. When pressing the buttons, the bending plate rotates to the left or right. The rotation of the bending plate stops when the corresponding button is released.Automatic operation mode:
The bending angle of the workpiece is pre-set and controlled automatically. An automatic cycle is performed when the pedal is pressed and held, after which the pedal is released. During bending, the pedal may be released, causing the bending plate to stop rotating. Pressing the pedal again continues the automatic cycle until it is completed or until the pedal is released again.


Contact us
Contact us