Свържете се с нас: +359 94 600 185

 

 

straightening cutting machine 16mm

to №16

STRAIGHTENING AND CUTTING MACHINE up to #16
The straightening and cutting machine is designed for unwinding, straightening, and cutting rebar up to #16 from coils with an outer diameter of up to 1550 mm and a weight of up to 2000 kg.

Technical Specifications
Manual Mode:
Used for initial loading of the machine with rebar or for testing: testing the hydraulics, pulling, cutting, measuring, and spindle rotation.Automatic Mode:
Automatically pulls and straightens the rebar, cutting a set number of pieces to a specified length.The straightening and cutting machine mainly consists of three units:
1. Unwinding device;
2. Straightening and cutting module;
3. Racks.
Rebar Diameter, mm Ø6 – #16
Outer Diameter of Coil, mm < 1550
Inner Diameter of Coil, mm >500, >800
Pulling Speed, m/min up to 100
Spindle Speed, min-1 1680
Cutting Time, min 0.0025
Pulling Force, N 10650
Cutting Length*, m 0.1 – 99
Length Tolerance, mm ±1
Number of Cuts per Cycle 1 – 9999
Power, kW 45
Voltage, V 380
Weight, kg
Straightening and Cutting Module 1800
Racks 140
Unwinding Device 1060
Total 3000

Dimensions L x B x H, mm
Straightening and Cutting Module 2400 x 2000 x 850
Racks 12400 x 1200 x 1250
Unwinding Device 2500 x 1900 x 3500


Contact us
Contact us