straightening cutting machine 12mm electro-mechanical

to №12 - electro-mechanical

STRAIGHTENING – CUTTING MACHINE up to F12 – Electro-Mechanical

The straightening and cutting machine is designed for unwinding, straightening, and cutting rebar up to F12 from coils with an outer diameter of up to 1550 mm and a weight of up to 2000 kg.

Technical Specifications

Manual Operation Mode:
Used for initial loading of the machine with rebar or for testing: testing hydraulics, pulling, cutting, measuring, and spindle rotation.Automatic Operation Mode:
Automatically pulls and straightens rebar, cutting a set number of pieces to the specified length.The straightening and cutting machine primarily consists of three units:
1. Unwinding device;
2. Straightening-cutting module;
3. Stands.

Rebar Diameter, mm	Φ6 to F12
Outer Diameter of Coil, mm	< 1550
Inner Diameter of Coil, mm	>790
Pulling Speed, m/min	up to 108
Spindle Speed, min^-1	up to 2500
Cutting Time, sec	0.7
Pulling Force, N	up to 9055
Cutting Length*, m	0.1 to 99
Deviation from Cutting Length, mm	±1
Number of Cuts per Cycle	1 to 9999
Power, kW	20.5
Voltage, V	380
Weight, kg.
Straightening-Cutting Module	980
Stands	180
Unwinding Device	150
Total	1310
Dimensions L x B x H, mm
Straightening-Cutting Module	1800 (2400) x 1300 x 1700
Stands	12500 x 1000 x 1100
Unwinding Device	1600 x 1600 x 2000

straightening cutting machine 12mm electro-mechanical

Contact us

Useful relationships

Where to find us